B&T RTL-00

Links to different kind of modules, or modules of your own based on the RTL8710 chip, post hem here
dpape
Site Admin
Posts: 25
Joined: Fri Jul 29, 2016 6:11 pm

B&T RTL-00

Postby dpape » Wed Aug 17, 2016 4:28 pm

Hello,

Today I started testing my RTL8710 module from BOANTONG, the RTL-00 module. You can see my findings in viewtopic.php?f=10&t=10.

I have found the AT command reference and have attached is as a reference.

Kind regards,
Daan
Attachments
AN0075-Realtek-Ameba-1-at-command-v2.2.pdf
(687.23 KiB) Downloaded 550 times
B&T RTL-00 AT Commands.pdf
(1.38 MiB) Downloaded 656 times

dpape
Site Admin
Posts: 25
Joined: Fri Jul 29, 2016 6:11 pm

Re: B&T RTL-00

Postby dpape » Thu Aug 18, 2016 2:42 pm

cnxsoft (http://www.cnx-software.com/2016/08/18/ ... ent-530353) pointed out the AT command set from B&T does not contain any GPIO commands. But he found an other AT command set from the ameba modules (I attached it in the first post) where you can control GPIO's:

Write:

Code: Select all

ATSG=W, PC_5,1


Read:

Code: Select all

ATSG=R, PC_5


Thank you cnxsoft

2000ecco
Posts: 1
Joined: Fri Sep 22, 2017 9:04 pm

Re: B&T RTL-00

Postby 2000ecco » Fri Sep 22, 2017 9:12 pm

Hey Guys,

I got an NodeMCU RT-00 Board as mention here https://www.cnx-software.com/2017/01/04/10-rtlduino-is-an-arduino-compatible-wifi-iot-board-based-on-realtek-rtl8710af-wisoc/#comments

It has been shipped with the AT-Command based Firmware.
I read that sketches (lua or Arduino) can be uploaded OTA without programmer.
Google leads me to some Ameba-Boards and solutions for bulk RT-00 modules, but none for this NodeMCU Board. :?:
Can someone give me some advice how to start with this module?

Thanks in advance

2000ecco


Return to “Modules”

Who is online

Users browsing this forum: No registered users and 1 guest