B&T RTL-00

Links to different kind of modules, or modules of your own based on the RTL8710 chip, post hem here
dpape
Site Admin
Posts: 26
Joined: Fri Jul 29, 2016 6:11 pm

B&T RTL-00

Postby dpape » Wed Aug 17, 2016 4:28 pm

Hello,

Today I started testing my RTL8710 module from BOANTONG, the RTL-00 module. You can see my findings in viewtopic.php?f=10&t=10.

I have found the AT command reference and have attached is as a reference.

Kind regards,
Daan
Attachments
AN0075-Realtek-Ameba-1-at-command-v2.2.pdf
(687.23 KiB) Downloaded 775 times
B&T RTL-00 AT Commands.pdf
(1.38 MiB) Downloaded 940 times

dpape
Site Admin
Posts: 26
Joined: Fri Jul 29, 2016 6:11 pm

Re: B&T RTL-00

Postby dpape » Thu Aug 18, 2016 2:42 pm

cnxsoft (http://www.cnx-software.com/2016/08/18/ ... ent-530353) pointed out the AT command set from B&T does not contain any GPIO commands. But he found an other AT command set from the ameba modules (I attached it in the first post) where you can control GPIO's:

Write:

Code: Select all

ATSG=W, PC_5,1


Read:

Code: Select all

ATSG=R, PC_5


Thank you cnxsoft


Return to “Modules”

Who is online

Users browsing this forum: No registered users and 1 guest